Accredited Engine Course (TM AEC)

This course is based on the guidelines, suggestions, and requirements of TM Model Course 1.05

Description

 Malta Enterprise - Get Qualified Scheme

On successful completion of the training and assessment, trainees should be able to:

  • Have an understanding of the Yachting Industry;
  • Have an understanding of the applicable requirements of the Malta Commercial Yacht Code;
  • Have a basic knowledge of the mechanical and electrical systems onboard;
  • Have a basic knowledge of the safety systems onboard and know how to operate them;
  • Carry out safe and effective engineering operations onboard;
  • Gain proficiency in troubleshooting, fault finding, and the relevant resolution practices/techniques;
  • Carry out regular/periodical/preventive maintenance of onboard equipment/machinery;
  • Provide the necessary assistance during Surveys;
  • Respond to emergencies onboard;
  • Have a thorough knowledge of the applicable International Codes and Conventions.

Course Structure

1. Introduction to the Yachting Industry and to the Malta Commercial Yacht Code

a. Types of Yachts
b. Commercial and Pleasure (Private) Yachts
c. Malta Commercial Yacht Code

2. Safety in the Engine room and in the Garage spaces

a. What to do in case of engine room or garage space fire
b. Engine room and Garage spaces Escapes and Escape Route
c. Fixed Fire Extinguishing Systems
d. Portable Fire Extinguishers
e. Fire Alarm Systems
f. Engine room firefighting equipment
g. Garage firefighting equipment
h. Basic fire-fighting techniques
i. Extinguishing gas Asphyxiation Hazards
j. Basics in carrying out a Risk Assessment
k. Personal Protective Equipment (PPE)
l. Emergency Escape Breathing Devices (EEBDs)
m. Main and Emergency Fire pumps
n. Remote Fuel valves shut-off system
o. Potential Fire Hazards
p. Entry into enclosed spaces/tanks
q. Means of Communication
r. Garage/Transom door opening and locking systems
s. Garage/Transom door sealing system
t. What to do in case of an accident onboard

3. Unmanned (UMS) and Manned Machinery Spaces

a. Main differences between the two
b. Safety and Alarm systems and equipment installed in an UMS
c. Alarm repeaters

4. Yacht Main and Auxiliary Engines and Tender/Toys Engines:

a. Compression Ignition Engines
b. Spark Ignition Engines
c. Two Stroke and Four Stroke cycles
d. Diesel Engine Components, Terminology and Functions
e. Pistons/Cam-Shafts’ configurations
f. Inboard and Outboard Engines
g. Engine Performance Data and Parameters
h. Exhaust System

5. Fuel System

a. Types of Fuel Supply systems and their basic differences
b. Fuel System Safety
c. Fuel Tanks, Gauging, Filling, Venting, and Isolating
d. Remote Fuel Valve Shut-Off system
e. Fuel Pumps
f. Fuel Injectors
g. Bleeding of a Fuel System
h. Turbo Chargers
i. Bunkering Procedures, Safety, and Pollution Prevention
j. Air/Fuel ratios

6. Lubricating System

a. Lube Oil testing/changing intervals
b. Lubricating Oil Pumps
c. Lubricating Oil Filters including centrifugal Lube Oil Filters
d. Lubricating Oil Circuit
e. Bearing Material and the action of Friction
f. The importance of Lubricating Oil in minimizing friction and in dissipating heat

7. Engine Cooling System

a. Cooling water Open and Closed-circuit cooling
b. The importance of maintaining the correct cooling water temperature
c. Heat Exchanger
d. Sea Valves
e. Sea-water strainers/filters
f. Cooling water pumps

8. Power Transmission

a. Stern tube bearings and seals
b. Fixed and CPP propulsion systems
c. Gearboxes
d. Control Systems

9. Steering Gear and Hydraulics

a. Types of Steering Gear Systems including water jet steering systems
b. Emergency Steering Gear operation including both traditional steering systems and
unconventional steering systems
c. Hydraulic circuits and function
d. Hydraulic rams
e. Hydraulic power packs

10. Bilge Systems

a. Typical bilge piping/tanks arrangement
b. Back flooding
c. Main and Emergency Bilge pumps

11. Refrigeration Systems

a. Refrigeration phases and main components and circuit
b. HVAC systems

12. Petrol

a. Petrol Hazards;
b. Storage of petrol onboard in containers
c. Petrol in the fuel tanks of tenders/toys

13. Bottled LPG Gas

a. Typical bottled LPG installations and maintenance
b. LPG safety systems

14. Electrical Systems

a. Electrical Supply systems on-board, including generators, batteries and shore supply
b. Avoidance of Electrical Shock
c. Emergency Electrical Supply systems and arrangements
d. Insulation Testing and its importance
e. Possible Hazards of Batteries during charging
f. Battery Charging safety systems

15. Introduction to MARPOL Regulations

a. Annex I – Regulations for the Prevention of Pollution by Oil
b. Annex IV- Prevention of Pollution by Sewage
c. Annex V – Prevention of Pollution by Garbage
d. Annex VI- Prevention of Air Pollution
e. Documentation/Certificates to be maintained onboard in relation to MARPOL requirements

16. Engine Room Survey and Documentation

a. Items/Equipment/Machinery/Documentation usually inspected by Surveyors during periodical
Class and Statutory Surveys
b. Engine Room Logbook
c. Oil Record Book
d. Fuel and Lubricating Oil consumption records

17. Lifting Appliances

a. Safe Lifting Techniques and Equipment
b. Safe Working Load (SWL)

18. Basic Engineering Maintenance

a. The importance of following the manufacturer’s maintenance schedule
b. Routine Maintenance Procedures
c. Preventive Maintenance
d. Approved Fluids and Lubricants manuals
e. Servicing Instructions
f. Condition Monitoring

19. Basic Handover Procedures

a. Documents and information required during a handover

20. Practical/Demonstration Sessions

a. Overview of the parts/equipment/machinery which were mentioned during the theoretical part of the course
b. Checks and procedures before starting an engine
c. Common causes of engine starting failure
d. Reading and Monitoring of Engine Gauges
e. Engine Alarms
f. Exhaust smoke colour indications
g. Engine Overheating causes and symptoms

Entry Requirements

*The trainee shall be not less than 18 years of age.


Requirements for the issuance of the Transport Malta AEC (Yachts) licence:


The trainee shall:

  • Have completed and passed the assessment for the Accredited Engine Course (Yachts).
  • Be in possession of a Basic Training Certificate in accordance with STCW Reg. VI/1 in:
  1. Personal survival techniques
  2. Fire Prevention and Fire Fighting
  3. Elementary First Aid
  4. Personal Safety and Social Responsibility
  • Be in possession of an IMO/ILO Medical Fitness Certificate.

Similar courses

For anyone looking to start their career within the interior department onboard a superyacht, then you would certainly be advised to start here. The Interior Hospitality Yacht Training | Level 1 course, based on the GUEST Introduction training, will give anyone a huge advantage to both finding the right employment as well bringing the relevant skills and value to a first onboard positon.

More Information

The STCW Basic Safety Training Refresher course is designed in accordance with the latest amendments to the STCW Convention regulation 1.14 and section A-1/14 of the STCW Code.

More Information

This entry level course aims to give candidates the required basic safety training and knowledge listed by the STCW Code A-VI/1. Seafarers wishing to work onboard a commercial vessel in ANY capacity must successfully complete this course before engaging in employment.

More Information

Radio communications certificate of operators – Specifications of minimum standard of knowledge, understanding and proficiency for RT (VHF only) Operators (S.L. 399.35)

More Information

Efficient Deckhand is a practical and theory-based course of which is designed to give students the necessary knowledge and skills to become a proficient seafarer onboard.

More Information

On successful completion of the necessary course module/s, Pass of oral examination, and presentation of required sea service, candidates will be able to work as a Master on Yachts less than 500GT / Chief Mate on Yachts <3000GT - STCW Reg II/2

More Information

The STCW Ship Security Awareness training for all Seafarers course is aimed at mariners who do not have a designated security duty.

More Information

Get this licence and you will be able to earn a living while doing something you love!

More Information

On successful completion of the necessary course module/s, Pass of oral examination, and presentation of required sea service, candidates will be able to work as a Master on Yachts less than 3000GT - STCW Reg II/2.

More Information

On successful completion of the course & oral examination, candidates will be able to work as a Deck Officer on YACHTS less than 3000GT - STCW Reg II/1. [DATES]

More Information

Engineer of vessels with propulsion machinery of maximum continuous power of 750kW, operating commercially within territorial waters.

More Information

On successful completion of the course & oral examination, candidates will be able to work as an Engineer on Vessels of Unlimited Tonnage - STCW Reg III/1.

More Information